Remote Control FBR12
The SCHNEID-FBR12 remote control is compatible with the module controller series MR12 (direct connection to the control panel) and the CM08-based MODULE series MR08 (connection via the com-base). The software controller version on the MR08 must be 8.19 or higher.
With the MR12 it is possible to connect one FBR12 per heating circuit directly to the control panel (see description of the SCHNEID-MR12 module controller).
The color touchscreen control panel always displays the time, the current outdoor and room temperature, the storage tank temperature, the setpoint adjustment and the operating status. The display shows: Automatic / Day, Automatic / Night, Automatic / OFF or one of the 5 dialing programs, which can be set at the bottom of the display (automatic, day, night, party and OFF).
The two arrow keys are used to change the current room temperature by -4 ° C to + 4 ° C. A room sensor is installed in the remote control, which can be used to apply various heating control programs and to optimize the SCHNEID control unit.
When the function keys on the display are touched, the backlight turns on, and off again after 30 seconds from the last operation.
There are 16 million different display background colors and foreground colors to choose from.
Available in 5 different frame colors white, black, chrome, red, blue. (The frames can be easily exchanged if necessary.)
Scope of delivery: SCHNEID FBR12 remote control with color touchscreen, room sensor and frame in color black.
Height, width, depth: 87,1×121,1×25,4mm
Downloads & LinksDatenblattAnklemmplan